Connectivity

• 4G LTE Cellular Network Support
  • LTE-FDD Bands: B1, B3, B5, B8
  • LTE-TDD Bands: B34, B38, B39, B40, B41
  • GSM/GPRS Bands: 900 MHz / 1800 MHz
• High-Speed Data Transfer
  • LTE Cat 1 downlink/uplink capability
  • USB 2.0 interface supporting High Speed (480 Mbps) and Full Speed (12 Mbps) modes
• Communication Interfaces
  • USB 2.0 (Slave Only): For AT commands, data transmission,firmware upgrade, and debugging
  • UART Interface: Optional control via AT commands

Antenna & Signal

• Antenna Type: On board 4G LTE antenna and External antenna  (u.FL equivalent) connector
• Antenna Specs:
  • Frequency Range: 700–2700 MHz
  • Gain: Up to 8 dBi
  • VSWR: ≤1.8
  • Impedance: 50 Ohm
  • Dimensions: 27mm x 11mm

Hardware Features

• Status LEDs: Onboard indicators for power and network status
• E SIM Support: Onboard E-SIM for seamless cellular connectivity
• Compact Form Factor: Space-efficient design for integration in embedded and industrial projects

. Interfaces

• UART: Configurable baud rate up to 230400 bps, AT command interface.
• RS485/RS232: Best for Industrial serial communication, long-distance and noise-resistant communication 
• GPIO: Several general-purpose I/O pins for external device control.
• ADC: 10-bit ADC input for analog signal monitoring.
• PWM: PWM outputs for basic actuator control.
• SPI/I2C: Optional for sensor and peripheral expansion.
• Status LEDs:

     4 Onboard LEDs to indicate various device states such as power, network status, GNSS fix, and user-defined alerts.

 Power Specifications

• Input Voltage Range: 12V to 24V DC.
• Power Efficiency: Integrated high-efficiency regulators for stable performance.
• Sleep Current: Ultra-low power mode (<10mA in sleep).
• Battery Support: Optional Li-Ion/Li-Po battery interface with charging circuitry.
• Fuse :Protects board circuitry from overcurrent damage
• Buck convertor(MP9486AGN-Z) : Higher switching frequency Convertor efficient for  DC-DC step-down voltage regulation
• Reverse polarity protection: Prevents damage due to incorrect power supply connection

Environmental & Usage

• Applications:
  • Asset Tracking & Fleet Management
  • Smart Metering & Remote Monitoring
  • Industrial IoT Systems
  • Security & Surveillance Systems
• Operating Temperature: Designed for industrial environments (extended range depends on PCB design)

Detail Extended Feature

1. Accelerometer

• Type: 3-axis MEMS Accelerometer
• Model: ICN-42605
• Features:
  • Measurement Range: ±2g/±4g/±8g/±16g (configurable)
  • Output: I2C/SPI Digital Interface
  • Resolution: 12-bit
  • Operating Voltage: 1.8V to 3.6V
  • Features: Motion detection, free-fall detection, activity/inactivity recognition

2. Flash Memory

• Type: NOR Serial Flash
• Model:W25Q128JWSIQ
• Features:
  • Capacity: 128Mbit (16MB)
  • Interface: SPI
  • Erase/Write Cycles: 100,000+
  • Retention: >5 years
  • Speed: Up to 133 MHz
  • Use Case: Store firmware, logs, device settings, and OTA update files

3. L89 GNSS Module

• Manufacturer: Quectel
• Type: Multi-Constellation GNSS Receiver
• Features:
  • Constellation Support: GPS, GLONASS, Galileo, BeiDou, QZSS
  • Channels: 99 acquisition channels, 33 tracking channels
  • Update Rate: 1 Hz (up to 10 Hz optional)
  • Accuracy: <2.5m CEP
  • Cold Start: <35s, Warm Start: <30s, Hot Start: <1s
  • Interface: UART
  • Voltage: 3.0V – 4.3V
  • Use Case: Real-time location tracking and navigation, geo-fencing

4. Watchdog Timer

• Type: External Hardware Watchdog Circuit 
• Features:
  • Timeout Range: Adjustable (typ. 1s – 120s)
  • Voltage: Compatible with core system voltage (e.g., 3.3V)
  • Use Case: System auto-restart in case of firmware hang or deadlock
  • Benefits: Increases device reliability and uptime